The introduction of the fire - extinguishing test of the Fire Chief® automatic fire - extinguishing device with fire - extinguishing tubes newly developed by FUJI Safety: The test is mainly aimed at extinguishing Class A/B (solid, liquid, soluble solid) fires, and the effect has been verified, which conforms to the internal corporate standards of FUJI Safety.

Installation requirements:

The Fire Chief® fire - extinguishing pipes need to be installed on the top of the protected part and should be firmly installed. It is best to use the accessories provided by FUJI Safety; ensure the high - temperature resistance performance of the fixing accessories to ensure that they do not deform or fall off under fire and high - temperature conditions. When installing the fire - extinguishing pipes, they should not be folded in half and can be coiled into an arc with a radius of not less than 20 cm.

The fire - extinguishing pipes should not directly contact or be close to components with a working temperature exceeding 60 degrees Celsius.

The position of the fire - extinguishing pipes should avoid rain and snow, avoid contact with corrosive chemicals, and should not directly contact galvanized parts.

After the installation of the fire - extinguishing pipes is completed, warning signs can be pasted in appropriate circumstances.
If instruments and communication devices are connected at the joints of the fire - extinguishing pipes, they should be in a position convenient for observation and maintenance.